7. Once the engine starts to run, let it warm up by operating the throttle up
and down for 10 to 15 seconds, then move the choke lever to the RUN
position once it starts running smoothly.
8. Be patient and let it warm up a little. Once the engine is warm, the idle will
smooth out and it will be ready to ride.
NOTE: Extended running with the choke fully on will cause the engine to run
poorly and can cause damage to the spark plug and cylinder wall.
If the engine fails to start after repeated attempts, it may mean that it is
ooded with excess fuel. A common indication of a ooded engine is a
strong smell of fuel around the mini bike. Follow the steps below to clear a
ooded engine.
1. Move the engine kill switch to the OFF position.
2. Switch the choke lever to the RUN position.
3. Twist the throttle all the way down to the full open position.
4. Using the pull starter, crank the engine over 10 or 15 times.
5. Move the kill switch back to the ON position.
6. Start the mini bike using the pull starter and NO CHOKE.
To stop the engine, move the kill switch located on the right hand grip to the
OFF position. The engine will stop.
NOTE: Be sure to close the Fuel Valve and lean the bike over onto the kickstand
when done riding.
Before riding this mini bike, be sure that you have read and understand this
entire owners manual up to this point, including the sections that are titled
Important Safety Information and
Before You Ride. Even if you have ridden
other mini bikes in the past, take time to become familiar with how this
mini bike runs and how it handles. Dierent bikes have dierent handling
characteristics. Always practice in a safe area until you feel comfortable with
how this mini bike runs.
For your safety, always avoid running the engine in an enclosed
space with poor ventilation, such as a garage. The mini bike’s exhaust
contains poisonous carbon monoxide which can collect rapidly and cause
illness or death.
Not equipped with lights. Do not ride after dark.
1. Move the engine kill switch to the ON position.
2. Turn the fuel valve to the ON position.
3. If the engine is cold, ip the choke lever up into the START position.
If the engine is warm, you may not need to use the choke at all.
4. Stand over the mini bike and hold the handlebars.
5. Twist the throttle down some, to give it a little gas.
6. Using your right hand, pull the pull start handle upward sharply. It may
take a few tries to get it started. The pull starter will recoil automatically.
Do not let go of the pull start handle in the extended position, but lower
it back to the recoiled position gently.
SAFE RIDING PRECAUTIONS
STARTING THE ENGINE
A FLOODED ENGINE
STOPPING THE ENGINE
The following section of the manual provides some basic information on
how to begin riding your mini bike. We will cover how to start and stop the
engine, how to use the throttle and brake and what you should do when
you nish riding.
BASIC OPERATION BASIC OPERATION
1312 BASIC OPERATION
TROUBLE
? DO NOT RE
TURN TO STORE
contact us! 888-488-MOTO (6686)
or email [email protected]
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals